Home    Up a Level    Terms & Conditions    Search    Contact Us    Login     Recent Orders

**MEGA SALE** 35% off RRP on ALL Brett Martin Trade, Reflex and Ultra Rooflights **ENDING SOON**

ALL OPENING Rooflights are currently on an extended lead time of 7-10 working days until further notice

EZ Roof Product Page |  Paving Support

Paving Support

EZ Roof Product Page |  Paving Support



EZ Paving Support System EZ Paving Support System

EZ Stackable Paving Support pad - 14mm

This Polypropylene injection moulding raises the paving 14mm above the supporting surface and its integral spacers ensure a constant 5mm gap between each slab, so all water drains away immediately, leaving an "ever-dry" paved area.

As the paving is loose laid it's simplicity itself to replace damaged slabs or to inspect for possible waterproofing failure and all drainage outlets, services, manholes, etc., can be covered over to leave a completely unobstructed paved area.

Performance and Dimensions
Material: Polypropylene - age and weather resistant and fully compatible with all roofing materials.

Height and Base: 14mm
Thickness of Spacers: 5mm
Height of Spacers: 15mm
Diameter: 155mm
Stackable to six units high

Slab Size (mm) = Support per M2
600 x 600 = 2.8
600 x 300 = 5.6
500 x 500 = 4
500 x 250 = 8
450 x 450 = 5
450 x 225 = 10
400 x 400 = 6.2
300 x 300 = 11.2

Estimation of quantities

Due to the fact the EZ SUPPORT is easily divisible into halves or quarters, ensuring no wastage, it is possible to allow one unit per paving slab for estimation purposes.

However as most paved areas are in square metres the information above will give a fair indication of the number of EZ Supports required dependant upon the slab size and area.

Box Quantity is 360


Single (£0.40 Excluding VAT)
Box (£100.00 Excluding VAT)

Quantity:



EZ Levelling Shim - 3mm EZ Levelling Shim - 3mm

EZ Levelling Shims - for fine adjustments to the EZ Paving Support System

To ensure adequate strength, and minimal tolerance variation in the pavings, it is recommended that hydraulically pressed or reinforced concrete slabs be used.

However, occasions will arise when a combination of unevenness in the supporting surface, or tolerance extremes in the slabs, will require the use of the Levelling Shims. These can easily be broken into halves or quarters and, being only 3mm thick, will give the fine adjustment that may sometimes be necessary.

Thickness of Levelling Shims: 3mm
Diameter: 155mm

Box Quantity is 100


Single (£0.28 Excluding VAT)
Box (£18.00 Excluding VAT)

Quantity:



EZ Levelling Shim - 1mm EZ Levelling Shim - 1mm

EZ Levelling Shims - for fine adjustments to the EZ Paving Support System

To ensure adequate strength, and minimal tolerance variation in the pavings, it is recommended that hydraulically pressed or reinforced concrete slabs be used.

However, occasions will arise when a combination of unevenness in the supporting surface, or tolerance extremes in the slabs, will require the use of the Levelling Shims. These can easily be broken into halves or quarters and, being only 1mm thick, will give the fine adjustment that may sometimes be necessary.

Thickness of Levelling Shims: 1mm
Diameter: 155mm

Box Quantity is 100


Single (£0.28 Excluding VAT)
Box (£18.00 Excluding VAT)

Quantity:



Caro Paving Support System Caro Paving Support System

Heavy Duty - CARO Paving Support is one of the most economical and simple ways of laying roof or terraced areas.

This Polypropylene injection moulding raises the paving 15mm above the supporting surface and its integral spacers ensure a constant 5mm gap between each slab, so all water drains away immediately, leaving an "ever-dry" paved area.

As the paving is loose laid it's simplicity itself to replace damaged slabs or to inspect for possible waterproofing failure and all drainage outlets, services, manholes, etc., can be covered over to leave a completely unobstructed paved area.

Performance and Dimensions
Material: Block Co-Polypropylene - age and weather resistant and fully compatible with all roofing materials.

Height and Base: 15mm
Thickness of Spacers: 5mm
Height of Spacers: 15mm
Diameter: 175mm
Base Area: 22500mm 2

Maximum Loading per Caro Support 1200kgs

Slab Size (mm) = Caro Support per m 2
600 x 600 = 2.8
600 x 300 = 5.6
500 x 500 = 4
500 x 250 = 8
450 x 450 = 5
450 x 225 = 10
400 x 400 = 6.2
300 x 300 = 11.2

Estimation of quantities
Due to the fact the CARO SUPPORT is easily divisible into halves or quarters, ensuring no wastage, it is possible to allow one unit per paving slab for estimation purposes.

However as most paved areas are in square metres the information above will give a fair indication of the number of Caro Supports required dependant upon the slab size and area.

Price is per box of 140

Click to view Caro Paving Support Brochure

Price: £81.20 (Excluding VAT at 20%)

Quantity:



Paving Levelling Shim Paving Levelling Shim

Heavy Duty CARO Levelling Shims - for fine adjustments to the Caro Paving Support System

To ensure adequate strength, and minimal tolerance variation in the pavings, it is recommended that hydraulically pressed or reinforced concrete slabs be used.

However, occasions will arise when a combination of unevenness in the supporting surface, or tolerance extremes in the slabs, will require the use of the Levelling Shims. These can easily be broken into halves or quarters and, being only 2mm thick, will give the fine adjustment that may sometimes be necessary.

Thickness of Levelling Shims: 2mm
Diameter: 175mm

Price is per box of 100

Click to view Caro Paving Support Brochure

Price: £24.00 (Excluding VAT at 20%)

Quantity:



EZ Roof Product Page |  Paving Support



VAT Registration No: 890 8789 54

SecurityMetrics for PCI Compliance, QSA, IDS, Penetration Testing, Forensics, and Vulnerability Assessment

View Cart
Checkout

SecurityMetrics for PCI Compliance, QSA, IDS, Penetration Testing, Forensics, and Vulnerability Assessment






Shopping Cart

Items:
Value:

New Products


Everhard Check-N-Fold Seam Tester Everhard Check-N-Fold Seam Tester

Two Part Insulation Board Adhesive Two Part Insulation Board Adhesive

Leister Triac AT Hot Air Gun 1600w Leister Triac AT Hot Air Gun 1600w


Best Sellers


Better Spreader - Singlewide Better Spreader - Singlewide

Aluminium Vertical Spigot Outlet Aluminium Vertical Spigot Outlet

Trade - 900mm x 900mm Trade - 900mm x 900mm